Proven Ability
PC and PLC based systems to test production engines and sub-systems for major automotive manufactures.
Custom testing, assembly and inspection equipment for automotive and industrial customers.
Process machinery and systems for automotive, industrial and food applications.
We pride ourselves in out ability to provide all aspects of a machine from conception, manufacturing, installation and service to training on the machine. Customer 100% satisfaction is our company standard.
The President/Owner of the company, Darrel Huff, is a mechanical engineer by trade with 23 years of experience in designing machines for many different industries.
We are located in the Morganfield Industrial Park in Western Kentucky. Which is 50 miles south of Evansville, Indiana on US HWY 60.
Contact us at 270-389-4833 to discuss how Huff Technologies, Inc. can meet your specific needs.
Automotive Test Equipment
Huff Technologies Inc. designs and builds various engine and component testing and inspections systems. Today's market demands tight quality control and 100% inspection of engines, components, and accessories.
Field failures and low quality components are costly to repair and devastating to a company's reputation. Huff Technologies uses custom PC/PLC Data acquisition and control solutions, in-house software development capabilities married to various sensors, systems, and components to provide creative solutions to your testing and inspection needs.
Four Stroke Engine Test Stand
Problem: A customer producing 2 cylinder four stroke engines needed a fast, accurate way to test its engines on the assembly line. The system must be versatile enough to test different engines and save the data for records purposes.
Solution: Huff Technologies Inc. designed and produced three systems which allowed the customer to build a test profile for each motor type. The engine barcode is automatically scanned and the proper test profile is run for that type of motor. The system tests for fuel flow, starter amps, alternator amps, alternator volts, oil pressure, rpm, case pressures, water pump rotation, and performs a vibration analysis. All parameters must be within set limits or the engine is rejected. All data is stored under the engine serial number for record keeping purposes.
V-Twin Production Engine Dynamometer
Problem: Customer was breaking in motors on the assembly line but testing motors off line on facility dynamometers. This process was time consuming and expensive.
Solution: Huff Technologies Inc. designed and built a production line system to break-in, quality test, and then run a dynamometer test on the motors. The system runs a customer specified test profile to break-in and test the motors. Fourteen (14) separate systems and functions are tested during the break-in and dyno test. At the end of the break-in period, a sweep type dyno test is preformed and six pass/fail plots are generated. All data is stored for quality control and records purposes.
Wiper Motor Test System
Problem: Customer needed a final quality test system for its rebuilt wiper motors. With over 500 different motors, the system had to be versatile and simple to operate.
Solution: Huff Technologies Inc. designed and built a computer controlled test system which allowed the customer to run a different test profile for each type of motor. The motor barcode is scanned and a test profile for that motor is loaded. By engaging a start button, the test profile is run which checks for proper motor speed , amps, voltage fluctuations, all against a variable load. The system is then capable of printing a QC Pass Barcode and serial number to be placed on the motor.
